Before First Use - SOLIS CAFFESPRESSO PRO Mode D'emploi

Type 117
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

bE FO RE FiR St uS E
s
– Carefully take the appliance out of its packaging and remove and discard all
labeling and packaging materials.
– Remove all accessories from the appliance.
– Use the handle to lift out the water tank. Clean the water tank, portafilter, filter
baskets and milk jug using warm water and a gentle dish washing liquid. Rinse
well and dry thoroughly.
– Wipe the outer housing and drip tray with grill with a soft damp cloth and dry
thoroughly.
WARNING: Do not immerse the outer housing, power cord or power plug
in water or any other liquid and do not bring them into contact with water.
NOTE: Do not clean any of the parts or accessories in the dishwasher.
– Fill the water tank with cold tap water to the maximum mark MAX. Close the lid
again.
– If you remove the water tank for filling, place it back in and slide it down along
the guide rail until it fixes into place.
– Plug the power cord into a power outlet.
– Press the POWER-button (A), the button surround will flash.
– A pumping sound will be heard while the machine is heating. When the correct
temperature has been reached, all the button surrounds on the control panel will
illuminate and the appliance goes into Standby-mode.
72

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bes840

Table des Matières