Manufacturer's Certificates; Order Code - Endress+Hauser Cubemass Serie Consignes De Sécurité

XA000146D

Manufacturer's certificates

Order code

14
EC Declaration of Conformity
ä 4
EC type-examination certificate
Certificate number:
PTB 07 ATEX 2001
IEC Declaration of Conformity
Certificate number:
IECEx PTB 07.0006
Affixing the certificate number certifies compliance with the following standards (depending on the device
version):
• IEC 60079-0: 2004
• IEC 60079-1: 2003
• IEC 60079-7: 2006
• IEC 60079-11: 2006
• IEC 60079-18: 2004
• IEC 61241-0: 2004
• IEC 61241-1: 2004
The order code is indicated on the nameplate, which is affixed to the device in such a way that it is clearly
visible.
Additional information on the nameplate is provided in the associated Operating Instructions.
Structure of the order code
* * * * * – * * * * * * * * * * * *
Device type
* Placeholder: An option (number or letter) that depends on the device specification is displayed instead of the
placeholders.
• Device type
The device type section of the order code describes the device and the device construction.
• Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the basic
specifications. The number of positions depends on the number of features available. The selected option of
a feature can consist of several positions.
• Optional specifications
The optional specifications describe additional features for the device (optional features). The number of
positions depends on the number of features available. The features have a 2-digit structure to aid
identification (e.g. JE). The first digit (ID) stands for the feature group (e.g. J = test, certificate) and consists
of a number or a letter. The second digit constitutes the value that stands for the feature within the group
(e.g. E = NACE).
More detailed information on the device is provided in the following tables. These tables describe the individual
positions or IDs in the order code which are relevant to hazardous areas.
Device type
Position Selected option
1 Instrument
8
family
2 Sensor C
3 Electronics M
4 Nominal
01 to 06
5 diameter
Basic specifications
Description
Coriolis flow measuring system
Sensor C
Cubemass 8CM transmitter
Nominal diameter of the sensor
+ A* B* C* D* E* F* G* H* I* J* ...
Optional specifications
• Transmitter electronics in: [Ex ia] IIC/IIB
• Ex d housing in Ex d IIC or Ex demb IIC
Endress+Hauser
Cubemass