Troubleshooting; Malfunctions - NEFF K154 Série Manuel D'utilisation

en Troubleshooting

Troubleshooting

Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.

Malfunctions

Fault
The LED lighting does not
work.
The temperature differs
greatly from the setting.
The base of the refrigerator
compartment is wet.
34
Cause
The illuminant is defective.
The light switch is jammed.
Different causes are pos-
sible.
The condensation channel
or drainage hole are
blocked.
Troubleshooting
"Switch off the appliance."
1.
→ Page 30
Disconnect the appliance from the
2.
mains.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
Slide the illuminant cover back-
3.
wards and remove the illuminant
cover to the left
→ Fig.
7
Replace the illuminant.
4.
Replacement illuminant: 220–240
V AC, E14 bulb holder, see the de-
fective illuminant's wattage.
Check whether the light switch can
▶
be moved.
→ Fig.
8
"Switch off the appliance."
1.
→ Page 30
"Switch the appliance back on after
2.
five minutes." → Page 30
If the temperature is too
‒
warm, check the temperature
again after a couple of hours.
If the temperature is too cold,
‒
check the temperature again
on the following day.
"Clean the condensation channel
▶
and the drainage hole." → Page 33
⁠ .