Hoover HOC5S047INWIFI Mode D'emploi page 20

1. Open the door 90° and pull the hinge fixing tabs toward the outside of the oven.
2. Put the door at a 45° angle, then pull the door forwards and upwards at the same time to release
it. Remove the oven door and place it on a cushioned surface (e.g. on top of a piece of fabric) with
the handle facing down.
3. Press the two buttons on the left and right at the same time and pull the upper door cover
towards you to remove it.
4. Carefully remove the glass inside the oven, holding it firmly with two hands and placing it on a
soft, flat surface.
5.If there are glass panels in between, remove them and place them on a soft surface.
ATTENTION: the outer panel of glass is not removable
6. Clean the glass with a soft cloth using an appropriate cleaning product.
7. After cleaning, reassemble the parts in the opposite order to removal. On all glass panels, the
"Low-E" indication must be correctly legible and positioned on the left side of the door, near the
left side hinge. This ensures that the printed label on the first glass panel remains inside the door.
8. Refit the oven door cover by pushing inwards until you hear the two side buttons click into place.
9. Holding the door at 45°, simultaneously insert the right and left male parts of the hinge into the
holes of the hinges released, until you hear them click in place. Bring the door to an angle of 90° and
lock the fixing tabs in place by pushing them towards the inside of the oven.
1
4
7
2
5
8
EN 20
3
6
9