Tivoli Audio PAL+ Manuel Du Propriétaire page 7

Remote Holder
A separate holder for the remote control is included.
It incorporates adhesive tape on the backside. Peel
off the backing and apply the holder to either side of
your PAL + and insert the remote bottom first.
Guide to Features (Top and Front Panels)
1. MULTI-FUNCTION CONTROL WHEEL (TOP):
The control wheel conveniently serves
many functions:
Power: When the PAL + is off, press the wheel
briefly to power the unit on. When the PAL + is
on in any source, press and hold the wheel to
power the unit off. (Note: the remote's Power
button will not turn the PAL + on when the
unit is off and not connected to the external
power supply.)
Volume: When the PAL + is on in any source,
rotate the wheel clockwise to increase the
volume level and counter-clockwise to
decrease the volume level.
Tuning: When the PAL + is on in any source except Aux, press the wheel once and rotate
clockwise to manually tune up and counter-clockwise to manually tune down. Press
again to tune the station and return to the volume function. The letter "T" will show on
the display to indicate manual tuning mode. After about 7 seconds of no activity, the
control wheel will default back to the volume control function.
Source: When the PAL + is on in any source, press the wheel twice to see the source menu.
Rotate the wheel to the desired source and press to select the source shown. If a source is
not selected within 7 seconds, the display will default back to the last source used.
Snooze: When the alarm sounds, press the wheel to engage Snooze. A
show on the display when Snooze is active. The Snooze time is fixed at 7 minute Press
again during Snooze to cancel the Snooze. The Snooze function works when the PAL+
is connected to the external power supply. When operating on battery-only power,
pressing Snooze will have no effect.
7 – ENGLISH
1
icon will