Tivoli Audio PAL+ Manuel Du Propriétaire page 13

6. LANGUAGE (FOUND UNDER SETTINGS): Press Select and use pq and Select
buttons to set your language.
7. FACTORY RESET (FOUND UNDER SETTINGS): Press Select and use the pq or t u
and Select buttons to confirm (Yes) or reject (No) the factory reset. A factory reset will
restore factory defaults and cancel all your personal settings, such as station presets
and language. The Factory Reset may not be accessible when operating on battery-
only power.
8. ID (FOUND UNDER SETTINGS): Press Select to view the ID. If you contact your dealer or
Tivoli Audio with a question, you may be asked to provide the number shown in this field.
9. SLEEP (FOUND UNDER SETTINGS): Press Select and use the pq arrow and the
Select buttons to set the sleep timer to one of the available times. There is also a dedi-
cated Sleep button on the remote control. A small clock face will show on the display
when the Sleep timer is active.
NOTE: When operating on battery-only power (external adapter not plugged-in), if Sleep
is engaged and the alarm is set, after Sleep ends, the alarm will not sound. To use both
Sleep and Alarm features, please be sure the external adapter is connected.
10. BT MEMORY CLEAR: If you are experiencing difficulty pairing or connecting a device,
select "Yes" to clear the memory of all paired devices and try pairing again.
How to Set the Alarm
Access the alarm setting either through the main menu or by pressing the alarm but-
ton on the remote.
1. Alarm 1 is shown first. Use the pq and Select buttons to choose between Alarm 1
and Alarm 2. Note: At any point you can navigate through the alarm menu by using
the Back or t buttons, and the Select or u buttons.
2. Use the pq and Select buttons to set the alarm on or off. If the time and date are not
set, the PAL + will prompt you to set the Time/Date first.
3. Use the pq buttons to set/change the hour, then press Select. Repeat this process to set/
change the minutes, followed by AM/PM (if time is set to 12 hour format), then press Select.
4. Use the pq buttons to select how long you want the alarm to sound, then press Select.
5. Use the pq buttons to select the source you wish to wake to, then press Select. If you
set the source to DAB (includes DAB + /DMB) or FM, use the pq buttons to select the
station preset or last listened, then press Select. If the alarm source is set to DAB and
the last listened or preset station is unavailable at the time the alarm sounds, the alarm
will default to the tone.
6. Use the pq buttons to set how often the alarm should be set to wake, then press Select.
If "Once" is selected, you must set the date you wish the one time alarm to sound.
7. Lastly, use the pq buttons to set the volume level of the alarm, then press Select.
8. Repeat this process for Alarm 2 if desired.
If you make a mistake at any point in the process, press the Back button on the remote
and begin again.
13 – ENGLISH