QSC AcousticDesign Serie Mode D'emploi page 4

Adjust the Angle of the X-Mount™ Bracket
Refer to — Figure 5
NOTE: This step may be done now or after mounting the loudspeaker.
1. Use a 5mm hex wrench to loosen the adjustment locking screws.
2. Orient the bracket as necessary.
-15°
EN
3. Tighten the adjustment locking screws.
TD-000329-00-C
+30°
SIDE
~ ~ +/-70º
~ ~ +/-60º (AD-S6T)
TOP
— Figure 5 —
4
5 mm
+/-40º
Not available
on AD-S6T
FRONT