Care & Cleaning; Service & Customer Care - Kenwood FP680 Serie Mode D'emploi

care & cleaning
Always switch off and unplug before cleaning.
Handle the blades and cutting discs with care - they are
extremely sharp.
Store your slicing/shredding discs in the storage box
supplied k.
28
Some foods may discolour the plastic. This is perfectly
normal and won't harm the plastic or affect the flavour of
your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food
debris.
Store excess cord in the storage area at the back of the machine.
liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades - brush them clean using hot soapy water, then
rinse thoroughly under the tap. Don't immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
Detach the beaters from the drive head by gently pulling them free. Wash in
warm soapy water.
Wipe the drive head with a damp cloth, then dry. Do not immerse the
drive head in water.
all other parts
Wash by hand, then dry.
Alternatively they can be washed on the top rack of your dishwasher.
service & customer care
If the cord is damaged it must, for safety reasons, be replaced by Kenwood or
an authorised Kenwood repairer.
If you need help with:
Using your machine
Servicing or repairs
Contact the shop where you brought the food processor.
k
28
5