Before Use; Directions For Use - Binatone MGR-3030 Manuel D'instructions

15.Adapter for fixing the graters
16.Pusher for using the graters
17.Coarse grater
18.Fine grater
19.Shredder
20.Power cord storage compartment

BEFORE USE

Remove all packing materials from the ap-
pliance.
Wipe the housing with a damp lint free
cloth and wash all parts to be in contact with
food.
Rinse the washed parts of the appliance
with clean water and completely dry them be-
fore assembling.

DIRECTIONS FOR USE

1. Insert the screw (8) into the operating unit
(5).
2. Put the cross-shaped cutter (9) on the end of
the screw (8) so that the rounded tip of the
cutter (9) is facing the screw (8). Make sure the
cross-shaped cutter (9) is properly fixed.
3. Place the selected perforated disc (10) on top of the cutter (9)
so that the projections on the disk fit the slots in the operating
unit (5).
4. Tighten the seal ring (11).
5. To attach the operating unit (5) to the housing (1) insert it into
the opening in the grinder's housing, match the arrow on the
operating unit (5) with the symbol
gently and turn anticlockwise to match the arrow on the oper-
ating unit (5) with the symbol
6. Place the tray (7) on top of the funnel of the operating unit
(5). Now the grinder is ready for operation.
Dismantling
1. Push gently on the operating unit (5), turn it clockwise to
match the arrow on the operating unit (5) with the symbol
on the housing. Remove the operating unit (5) from the motor.
2. Untwist the seal ring (11).
3. Remove the perforated disk (10) and cross-shaped cutter (9)
from the screw(8). Remove the screw (8) from the operating
unit (5).
Use of the applinace
1. Place the grinder on a dry, smooth flat horizontal surface.
2. Remove the meat from the package. Cut out all bones and
Assembling
on the housing, push
on the housing (Picture B)
6