Special Safety Precautions; Description Of The Appliance - Binatone MGR-3030 Manuel D'instructions

SPECIAL SAFETY
PRECAUTIONS
Before plugging in the appliance, carefully
examine it to make sure there are no visible signs
of mechanical damage and that the cutting discs
and blades are properly installed and securely
fixed.
If during operation you smell burning, hear
strange sounds, or experience a decline in the
operating power, immediately unplug the appliance and clean
the meat grinder. If after cleaning the appliance does not
resume normal operation, contact an authorized service cen-
ter.
To avoid personal injuries when feeding the meat into the
appliance only use the pusher supplied with the grinder. Do
not feed the meat with your hands.
Do not switch on the appliance when empty.
Before replacing the cutting discs and attachments unplug the
appliance from the wall socket.
Do not lift and move the meat grinder during operation. Any
moving of the appliance should be made after the power is
switched off.
In the case of foods which need to be processed at high speeds,
the appliance should not be run for longer than 10 seconds at
a stretch. Let there be a break of 30 seconds before switching
it on again to prevent the motor from overheating. One can
tell that the machine is being overused when the sound of the
motor changes and slows down.
Do not use the appliance in sustained operation for longer
than 15 minutes. To avoid overheating, allow the appliance to
remain switched off for about 30 minutes.
DESCRIPTION OF THE
APPLIANCE
Picture A:
1. Housing with the electrical motor
2. On/Off/REV button
3. Integrated storage box for disks
4. Non-slip feet
5. Stainless steel operating unit with a funnel for
meat feeding
6. Food tray
7. Pusher
8. Stainless steel screw
9. Stainless steel cross-shaped cutter
10.3 stainless steel perforated disks with holes of different diam-
eters
11.Seal ring
12.Sausage attachment
13.Kebbe attachment
14.Plastic operating unit for using the graters
5