Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Operation
The operation of the clock is designed so that all flashing symbols can be
ad-justed using the
and
buttons. The displayed time is stored if no button
is pressed for 5 seconds. Pressing the
and
buttons for longer than
GB
2 seconds causes the display to change rapidly.
If the ignition is switched off while the heater is operating in continuous heating
mode, the display shows a remaining operating time of 15 minutes and the
heater continues to operate.
Switching on
Manual: Press the
button (continuous heating mode).
Automatic: By programming the start of heating.
Switching off
Manual: Press the button
.
Automatic: By programming the operating time when the heater is operating:
By setting the remaining operating time.
Setting the time/day
Press the
button for longer than 2 seconds – the time flashes – press the
and
buttons to set the time – the day of the week flashes – set the day
of the week.
21
Publicité
