Table des Matières
Publicité
Step 4
Fasten the DRAWER SIDES (D34, D35, D36, D37, D46, D47, D211, D32) to the DRAWER BACKS (D74, D77, D76, and D78).
å
Use twelve BLACK 1-9/16" FLAT HEAD SCREWS (30S). Be sure to use the exact parts as shown.
NOTE: The small drawer and drawer will only use one SCREW on each side. Be sure to use the top hole.
å
Slide the DRAWER BOTTOMS (D708,D716,D958) into the grooves in the DRAWER SIDES (D34, D35, D36, D37, D46, D47,
å
D211, D32) and DRAWER BACKS (D74, D77, D76, and D78). Be sure to use the exact parts as shown.
D35
Groove
D37
Groove
D47
Groove
D32
Groove
Page 10
D74
Use top hole
D34
Be sure the grooves in each
part line up with each other
D77
on the inside of the drawer.
Use top hole
D36
D76
D46
BLACK 1-9/16" FLAT HEAD SCREW
D78
D211
30S
(12 used in this step)
417714
D35
D74
D716
D34
D37
D77
D36
D716
D76
D47
D958
D46
D78
D32
D211
D708
www.sauder.com/services
Publicité
Table des Matières
