Felisatti RS135/18L Manuel D'instructions page 8

4. Removing / installing saw blade
Always remove battery pack before installing and removing saw blade.
REMOVING SAW BLADE
█
1. Remove battery pack.
2. Turn down the blade clamp lever.
3. Remove the blade saw from the blade clamp.
INSTALLING SAW BLADE
█
1. Remove battery pack.
2. Turn down the blade clamp lever.
3. Insert the blade into the blade clamp as far as possible; release blade clamp lever
BLADE SELECTION
█
o obtain the best perfor-mance from the saw, it is important to select the correct
T
blade for the particular application and type of material you wish to cut. By doing
this, you will get a smoother, faster cut and prolong blade life.
WRONG
8
All manuals and user guides at all-guides.com
WRONG
blade clamp lever
RIGHT