Felisatti RS135/18L Manuel D'instructions page 16

6. Orbital control lever
Orbital Control Lever
This saw has an orbital control with three positions that allows you to choose the best
cutting action for your material.
Position 2 is for maximum orbital action (most aggressive). In general, the "2" Position
should be used when cutting soft materials.
Position 1 is for less orbital action. In general, the "1" position should be used when
cutting hard materials
Position 0 is for normal up and down action (no orbital actions). In general, the "0"
position should be used when cutting metals.
1. To inctease the orbital action, turn the knob to a higher setting.
2. To decrease the orbital action, turn the knob to a lower setting.
7. Footplate
To Slide Footplate In or Out The footplate slides in or out to adjust the effective stroke
length for maximum control and longer blade life.
1. Remove the battery pack.
2. Press the footplate release button and slide footplate out to desired position. The
footplate can be locked in any of 4 positions.
3. Release the footplate release button to lock the footplate in desired position.
To Pivot Footplate
The footplate pivots to provide maximum control against the surface being cut.
1. Remove the battery pack.
2. Hold the saw securely, and then pivot the footplate to the desired position.
16
All manuals and user guides at all-guides.com
Footplate release
button