Maintenance - Felisatti RS135/18L Manuel D'instructions

10. Trigger switch
To stop the saw, release the trigger switch and allow the tool to come to a complete
stop.
The electric brake quickly stops the saw blade. This feature engages automatically when
you release the trigger switch.
Disconnect the plug from the power supply before making maintenance.
1. Check cutter blade
Use of worn cutter blade may cause damage to motor and decrease work
efficiency. Compensate or replace with new cutter blade immediately.
Use of extremely dull cutter blade may cause personal injury due to the
kickback during cutting operation. Replace the cutter blade that its cutting
performance is decreased with new one.
2. Environmental Protection
The tool and its accessories contain much raw materials and plastics that can be
recycled after their life. Therefore, plastic parts are indicated are indicated with their
material types so that they can be classified and recycled for each material type.
3. What to do when the tool does not work normally
It is very dangerous for customers to troubleshoot or repair the tool for themselves,
Contact the nearest A/S center (sales agency) and request for a service
The repair shall be requested to the qualified electric speciailst.
4. Y attachment cord
If the replacement of the supply cord is necessary. this has to be done by the
manufacturer or his agent in order to avoid a safety hazard.
18
All manuals and user guides at all-guides.com
8

Maintenance