Lupine PIKO R Manuel D'utilisation page 21

The switch on the lamphead as well as the Bluetooth remote are equipped with a
RGB-LED to show information about the dim level and the remaining battery capacity.
blue LED lighting:
green LED lighting:
red LED lighting:
red LED flashing +
light flashing ones:
blue + red LED
flashing in turn +
light flashing 5 times:
blue + red LED
flashing in turn:
Meaning of LED colors
Lamp is on high beam (15W).
Lamp is on a lower beam.
1. Battery Warning, low capacity remaining.
The red LED is lighting.
You can adjust the timing of the battery warning,
see progamming on next page.
2. Battery Warning, very low capacity remaining.
The red LED is flashing and Piko flashing ones, too.
Warning!
The red and blue LED flashing in turn, the lamp flashes 30
times. Stop immediately! The light will be switched off.
After switching the light on again, reserve power at a low
beam is available. Depending on the age of the battery, some
more minutes of light are provided.
completely discharged, the light will be switched off automati-
cally. So slow down!
Note:
The burn time remaining after the red LED is illuminated
depends on the total battery capacity, the ambient tempera-
ture and the battery's age.
When reserve power is
Piko R 21