cecotec GRANDHEAT 2590 Manuel D'instructions page 66

ENGLISH
Read the instructions on the bottom of the cabinet. Put the template on the bottom plane of
the cabinet.
Fig. 9.
Make the marks on the bottom part of the cabinet according to the "a" marks on the template.
Fig. 10.
Remove the bottom cabinet template and fix the mounting plate with a screw.
Microwave installation
Fig. 11.
Install the microwave in the cabinet. Make sure the back of the device is locked by the mounting
plate. Do no trap the power cord.
Fig. 12.
Open the door, fix the microwave onto the cabinet with a screw through the installation hole.
Then, fix the plastic cover onto the installation hole.
4. OPERATION
Clock setting
When the device is plugged in, it will beep once and the display will show "0:00".
Tap Clock/Timer to set the time. The hour digits will blink.
Turn the knob to set the desired hour, from 00-23.
Tap Clock/Timer. The minutes digits will blink.
Turn the knob to set the desired minutes, from 00-59.
Tap Clock/Timer to save the time settings. ":" will flash and the time will light.
Note:
If the clock is not set, the current time will not be displayed when the device is turned on.
During the process of clock setting, press " Stop/Clear ", to go back to the previous status
automatically.
Microwave cooking
Tap Microwave/Grill/Combi once. "P100" will be displayed on the screen.
Tap Microwave/Grill/Combi several times or turn the knob to select the microwave power:
"P100", "P80", "'P50", "P30" or "P10".
Tap the Start/+30sec/Confirm icon to confirm.
Turn the knob to set the desired cooking time. The set time should be 0:05-95:00.
Tap the Start/+30sec/Confirm icon to start cooking.
Example: Cooking at 80 % microwave power for 20 minutes.
Tap Microwave/Grill/Combi once. "P100" will be displayed on the screen.
66
GRANDHEAT 2590 BUILT-IN BLACK/WHITE