Product Installation - cecotec GRANDHEAT 2590 Manuel D'instructions

ENGLISH

3. PRODUCT INSTALLATION

Glass tray installation
Fig. 2.
5. Hub
6. Glass tray
7. Glass tray shaft
8. Glass tray ring assembly
When installing the glass tray:
Never place the glass tray upside down.
Both glass tray and glass tray ring assembly must always be used during cooking.
All food and food containers must always be placed on the glass tray for cooking.
If the glass tray or the ring assembly cracks or breaks, contact the Technical Support Service
of Cecotec.
Note: This appliance is intended for built-in use only. It is not intended for counter-top use
or for use inside a cupboard. The appliance must be installed in a 60-cm wide wall-mounted
cupboard.
Electrical connections
If the plug is no longer accessible after installation, an all-pole isolating switch must be on one
of the sides with a contact gap of 3 mm.
The fitted cabinet must not have a back wall behind the appliance.
The minimum height installation must be 85 cm.
Do not cover the ventilation slots.
Microwave
Fig. 3.
Screws
Fig. 4.
Mounting plate
Fig. 5.
Plastic cover
Fig. 6.
Built-in furniture
Fig. 7.
Preparing the cabinet
Fig. 8.
65
GRANDHEAT 2590 BUILT-IN BLACK/WHITE