Publicité
Les langues disponibles
Les langues disponibles
Playback setup
Menu to set the repeat mode under UPnP/DLNA compatible streaming: Repeat all, Repeat once or Shuffle.
Resume when power on
This function is ON by default. The device will resume with the last used status when powering on again.
Power-on options
This is to select the state/mode of the radio after a power reset. Choose to return to the standby mode or back to the main
menu.
Dimmer
Set the backlight level for the display. There are two settings: Mode and Level.
•
Mode - Normal or Power saving
Normal - the display will keep the same level of brightness without dimming down.
Power saving - the display will dim down after 20 seconds if no input is being made.
•
Level - Bright and Dim
Bright - This is to adjust the level of brightness in Normal mode.
Dim - This is to adjust the level of brightness in Dim mode.
•
Dimmer in standby
The display brightness in standby mode can be adjusted manually by turning the <Tune/Select> knob or by pressing
the <Cursor up/down> buttons on the remote. If no input has been registered within 20 seconds, the dim value will
stay the same as set in Configuration.
EQ (Equalizer)
Various equalizer presets can be set (for Headphone- and Line output only).
Buffer time
Sometimes you may experience uneven playback of the internet radio. This can happen if the internet connection is slow or
network congestion occurs. To help improving the situation, you can choose longer buffer time to get a few seconds of radio
stream before beginning to play. The default value is 2 seconds. You can choose 5 seconds if you prefer to have a longer
buffering time.
Information
View the Network and System Information of your radio. To quickly access this information, press the <Info> button on the
remote control. When you use your PC to manage the My favorite stations, you have to use the IP address to be able to view
the information. Type the IP address (Configuration > Information > Network Information > IP) to your PC's browser input
window.
Software update
There may be software released to upgrade features of the radio from time to time. Check the update menu regularly to keep
your radio up to date with the latest software.
Reset to default
You can do the reset to clear all the settings and return to the default settings. Note: all the station presets, settings and
configuration will be erased after performing the reset.
13
Publicité
