Drawing 03A For Nl-15 R / Sqr, Safety Frame Upgrade February 2017 - Thermopatch NL-15 R MAMMOTH Manuel Utilisateur

Drawing 03A for NL-15 R / SQR, SAFETY FRAME UPGRADE February 2017

From 2-2017 a modification of the part has been executed to solve the fault indicator, on the display (see
page 18. 6.5.9)
06 Safety switch interrupted or defective
2 x SPAMA-SU2-C1 have been replaced by 1 x SPAMA-SU2-C4 (the safety switch mounting plate)
In total 4 x SPAMA-SU2-B1 (Safety switch Omron V16-1-C5) are now used for the switches.
In the previous set, before February 2017, up this used to be 2 x SPAPEN-03-09 en 2 x SPAMA-SU2-B1.
Modifications on machines from productions before 2-2017 must be executed by qualified technicians;
take note that this is an important safety feature of the NL-15 machine.
Modifications are estimated to take up to 30 minutes.
Version before Februari 2017 Version since February 2017
RETOUR AU CONTENU 27 27
Pour plus d'informations sur nos produits et savoir comment nous contacter, visitez thermopatch.com