Drawing 03A For Nl-15 R / Sqr, Safety Frame Upgrade February 2017 - Thermopatch NL-15 R MAMMOTH Manuel Utilisateur

Drawing 03A for NL-15 R / SQR, SAFETY FRAME UPGRADE February 2017

Version before Februari 2017
Version since February 2017
V. 3.0 ENG
Jan2014
Manual NL-15 R / SQR V.4.2 traduction de la version originale NL-15 R / SQR V.4.2 NL Janvier 2021
From 2-2017 a modification of the part has been executed to
solve the fault indicator, on the display (see page 18. 6.5.9)
06 Safety switch interrupted or defective
2 x SPAMA-SU2-C1 have been replaced by 1 x SPAMA-
SU2-C4 (the safety switch mounting plate)
In total 4 x SPAMA-SU2-B1 (Safety switch Omron V16-1-C5)
are now used for the switches.
In the previous set, before February 2017, up this used to be
2 x SPAPEN-03-09 en 2 x SPAMA-SU2-B1.
Modifications on machines from productions before 2-2017
must be executed by qualified technicians; take note that this
is an important safety feature of the NL-15 machine.
Modifications are estimated to take up to 30 minutes.
29