Installation Of The Accessories (Optional) - SPORTSTECH DESK FIT DFT200 Mode D'emploi

INSTALLATION OF THE ACCESSORIES (OPTIONAL)

!
The handle is not included and can be bought additionally.
To install the handle, follow these 3 steps:
STEP 2
Then fix the handle, the circular seal,
the spring seal and the M8 screw on the
device as shown in the picture.
Firmly tighten all component parts and pre-assembled parts!
STEP 1
Remove the 4 screws on the front of the
device using the 5 mm hex wrench.
STEP 3
Then tighten the screws that were just
removed.
32