Ceado G210 Manuel D'utilisation page 51

GB
Problem
The blender does not start.
The blades do not turn with
the motor on.
Noise and vibration of
container.
Leakage of liquid from
container.
• Make sure it is plugged in.
• Make sure the safety circuit breaker is closed.
• Make sure the magnetic sensor in the lid is touching the
safety arm.
• Make sure the switch on the blender is turned to ON.
• If the problem occurs after a long period of intensive use the
motor may have overheated. Wait at least 20 minutes and try
again. If you put the blender in a cool place this will reduce
the waiting time.
• If the problem occurs after an overload, the circuit breaker on
the motor may have been tripped! Push the button on the
back or bottom of the appliance (not standard equipment on
all models).
• Make sure the blades and motor revolve freely.
• Make sure the rubber clutch is in good condition.
• Make sure the container is correctly fitted on the base.
• Make sure the collar, blades and joints are securely
tightened.
• Make sure the rubber clutch is not damaged.
• Try to unscrew and replace the collar.
• Make sure the collar is tightly fastened.
• Make sure the gasket is installed correctly (see Fig. 22).
Solution
51