Charging Battery - Petsafe Passport MPA19-13810 Manuel D'utilisation

fig. 1
Power Adaptor
Power
Adaptor
LED

Charging Battery

For safety reasons, the Lithium-ion Battery is shipped not fully charged. The battery will need to be fully
charged before use. To charge battery, connect supplied Power Adaptor to Charging Station and plug
Power Adaptor into a standard household outlet. Insert Lithium-ion Battery into Charging Station with Battery
Contacts facing down (fig. 1). The Charging Station LED Indicator will remain illuminated with a red light
until the battery is fully charged. After battery is fully charged, unplug Power Adaptor and disconnect from
Charging Station. Remove battery.
4
Lithium-ion
Battery
Battery Grips
Battery
Contacts
www.petsafe.net
Charging
Station
LED
Indicator