Helvi Explorer 120 Manuel D'instructions page 11

Navigation :
1 Use the arrows to scroll through the different submenus or files available
2 Press the SELECT button to enter the submenu or select a file.
3 Use the MODE button to return to the previous submenu
Import a new configuration:
This function allows you to download a new configuration («.gfc» file) into the charger via the USB key.
1 First, make sure that the"".gfc"" file corresponding to the new configuration is present on the USB key.
This file must not be located in a folder or subfolder of the USB stick.
2 Connect the USB stick to the charger.
3 Enter the "Import CONFIG" submenu
4 Select the file to download
5 Confirm the download of the file
6 The charger will then download the new configuration.
Export a configuration on a USB key:
This function allows you to save the current charger configuration («.gfc» file) to the USB stick.
1 Connect the USB stick to the charger.
2 Enter the "Export CONFIG" submenu
3 Confirm that the configuration has been saved.
The charger will then save its current configuration on the USB stick.
4
( file ""Config_file.gfc"").
Restore the previous configuration:
This function allows you to restore the second to last charger configuration in case of a problem or error
with the last downloaded configuration.
1 Enter the "Restore CONFIG" submenu
2 Confirm the restoration of the configuration.
3 The charger will then restore the penultimate configuration of the charger.
Import CONFIG
Select file
config.gfc
Continue?
YES
Loading
Export CONFIG
Continue?
YES
Loading
Restore CONFIG
Continue?
YES
Loading
11