Safety Instructions - Nebula Mars II Mode D'emploi

English
Deutsch
Español
Français
Italiano
Português
日本語
简体中文
‫لع َ ر َ ب ِ ية‬
01
21
40
59
78
97
115
133
149

Safety Instructions

Read and understand all instructions before you use this
device. Do not make any changes or settings that are not
described in this manual. If physical injury, loss of data
or damage is caused by failure to follow instructions, the
warranty does not apply.
Setup
To reduce the risk of fire and/or electric shock, do not
•
expose the device to rain or moisture, and objects
filled with liquids, such as vases, should not be placed
on the device.
• Do not place the device on soft surfaces such as
tablecloths or carpets as doing so could be a fire-hazard.
Do not place the device in areas susceptible to
•
excessive dust and dirt or near any appliance
generating a strong magnetic field.
To prevent overheating, do not block or clog the
•
ventilation openings.
Never place the device in a confined space. Always
•
leave enough space around the device for ventilation.
• Protect the device against direct sunlight, heat, large
temperature fluctuations and moisture.
• When the device runs for a long period of time and
the surface becomes hot, shut it down and unplug the
power cord. Resume operation only after the device
has cooled.
Always handle the device with care. Avoid touching
•
the lens.
Never place heavy or sharp objects on the device or
•
the power cord.
• To avoid electric shock, do not disassemble.
Only use attachments or accessories specified by the
•
manufacturer.
Avoid extreme vibration. It may damage the internal
•
components.
Do not allow children to handle the device without
•
supervision.
• Under the following conditions, a layer of moisture
can appear inside the device which can lead to
malfunctions: a) if the device is moved from a cold
01