Safety Instructions - Nebula Mars II Pro Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
English
Deutsch
Español
Français
Italiano
Português
日本語
简体中文
‫لع َ ر َ ب ِ ية‬

Safety Instructions

Read and understand all instructions before you use this device. Do not
make any changes or settings that are not described in this manual.
If physical injury, loss of data or damage is caused by failure to follow
instructions, the warranty does not apply.
01
Setup
• To reduce the risk of fire and/or electric shock, do not expose the
21
• Do not place the device on soft surfaces such as tablecloths or
39
• Do not place the device in areas susceptible to excessive dust and
57
• To prevent overheating, do not block or clog the ventilation openings.
• Never place the device in a confined space. Always leave enough
75
• Protect the device against direct sunlight, heat, large temperature
93
• When the device runs for a long period of time and the surface
111
• Always handle the device with care. Avoid touching the lens.
• Never place heavy or sharp objects on the device or the power cord.
129
• To avoid electric shock, do not disassemble.
• Only use attachments or accessories specified by the manufacturer.
147
• Avoid extreme vibration. It may damage the internal components.
• Do not allow children to handle the device without supervision.
• Under the following conditions, a layer of moisture can appear
device to rain or moisture, and objects filled with liquids, such as
vases, should not be placed on the device.
carpets as doing so could be a fire-hazard.
dirt or near any appliance generating a strong magnetic field.
space around the device for ventilation.
fluctuations and moisture.
becomes hot, shut it down and unplug the power cord. Resume
operation only after the device has cooled.
inside the device which can lead to malfunctions: a) if the device is
moved from a cold to a warm area; b) after a cold room is heated; c)
when the device is placed in a damp room. To avoid any moisture,
seal the device in a plastic bag before moving it to another room,
and wait for one to two hours before you take it out of the bag.
01

Publicité

Table des Matières
loading

Table des Matières