App Manager - Nebula Mars II Mode D'emploi

Projector
3.
On the home menu, select [Settings] > [Projector], and press
.
[Auto] / [Standard Mode] / [Battery
[Image Mode]
Mode]
[Color
[Normal] / [Cool] / [Warm]
Temperature]
Enable / disable auto keystone
[Auto Keystone
Correction] correction.
[Keystone
Manually make keystone correction. The
Correction] default value is 0.
Enable / disable auto focus.
[Auto Focus]
[Front]: The device is located in front of
the projection surface.
[Rear]: The device is located behind the
projection surface.
[Front Ceiling]: The device is hanging
from the ceiling in an upside down
[Projector Mode]
position. The image is rotated by 180
degrees.
[Rear Ceiling]: The device is hanging
from the ceiling in an upside down
position behind the projection surface.
The image is rotated by 180 degrees
and horizontally mirrored.

App Manager

4.
① On the home menu, select [Settings] > [App Manager] and
press .
② Select an app and check the current version, open or
force stop, check the storage used, clear data or cache, or
uninstall it.
12
When more than 3 apps are installed, you can select
T
[All] at the bottom line of the home page to enter
the [Apps] page. Select an app and press
remote control, and then you can select [Move To
Home] or [Uninstall].
Others
5.
On the home menu, select [Settings] to find more setting
options.
[General]
Select an on-screen display language.
[Language]
Turn the keypad tone on/off.
[Keypad Tone]
[Automatic Sleep
5 min / 15 min / 30 min
Interval]
[Background]
Select a background.
Clear all the cached data stored on the
[Clear Cache]
projector.
[Date&Time]
Enable / disable automatic date and
[Automatic
Date&Time]
time.
[Date] Manually set date.
[Time] Manually set time.
[Select time
Select time zone.
zone]
Select 24-hour format or 12-hour
[Use 24-hour
format]
format.
[Upgrade]
Check if it is the latest version. Follow
the on-screen instructions to update
[Check Update]
the software version.
All data on the built-in storage will be
[Recovery]
erased.
on the
[About]
13