Initial Filling Or Rinsing Of The Entire Interchangeable Unit - Xylem TitroLine 7500 KF Mode D'emploi

119

Initial Filling or Rinsing of the Entire Interchangeable Unit

2.7.4
While the initial filling or rinsing programme is being run, please place a sufficiently dimensioned waste
vessel under the titration tip.
Initial filling of the interchangeable unit is done using the «rinsing» program.
Fig. 25
On the main menu (Fig. 25), press <MODE> to navigate to the methods/system (Fig. 26).
Fig. 26
Pressing <↑> twice will take you to the «Rinsing» selection immediately (Fig. 27).
Fig. 27
Confirm the selection by pressing <ENTER>/<OK>.
At this point you can select the number of rinsing cycles (Fig. 28).