hestan AGPO33LK-TQ Instructions D'installation page 4

DISASSEMBLY
7. Remove these screws and remove the front frame with the arch attached.
EN
ASSEMBLY
1. From the new items in the box, attach the stainless steel inner arch on the face of the oven as
shown below. The lip of the arch goes inward (look at the old assembly you removed in the step
above). Install the two INNER screws only. Leave them slightly loose.
INNER
ARCH
4
©2022 Hestan Commercial Corporation
(CONT.)
REMOVE
4 SCREWS
INSTALL 2
INNER SCREWS
FRONT
FRAME
& ARCH
LIP