Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DISASSEMBLY
1. Begin by removing the items shown. The flue
cap simply rests on top of the flue collar. Pull
it straight up.
EN
FLUE
FLUE
COLLAR
DOOR
COVER
3. Remove 2 more hidden screws.
REMOVE
2 SCREWS
2
©2022 Hestan Commercial Corporation
CAP
KNOB
REMOVE 2
THUMBSCREWS
REMOVE 2
SCREWS
2. Remove the chimney tube, then remove 4 screws
holding the flue collar on top of the oven. Set
these items aside.
REMOVE
4 SCREWS
4. Remove the fasteners shown below.
*
For Stainless Steel units, do this step and
proceed to the next step.
REMOVE
CHIMNEY
TUBE
LANDING
LEDGE
REMOVE 4 BOLTS
USE 10mm OR 7/16"
WRENCH
CONTROL
PANEL
Publicité
Table des Matières
