Menu Options; Menu Selections; Recall Of Stored Data - Tintometer Lovibond MD200 Mode D'emploi

Menu options

GB

Menu selections

Press the [MODE] key and hold.
Mode
Switch the unit on using the [ON/OFF] key.
On
Allow the 3 decimal points to be displayed before releasing the
Off
[MODE] key.
!
The [!] key allows for selection of the following menu points:
1
Store Date
2 1
1
3 4
Time Cal 2
4
The selected menu is indicated by an arrow in the display.
Store Date
diS
1
Time Cal
After confirming the selection with the [MODE] key the photometer
shows the last 16 data sets in the following format (automatically
Mode
proceeds every 3 seconds until result is displayed):
Number
Year
Date
Time
Test
Result
Zero
The [ZERO/TEST] key repeats the current data set.
Test
The [MODE] key scrolls through all stored data sets.
Mode
!
Quit the menu by pressing [!] key.
Store Date
Prt
1
Time Cal
Note: To print data, or to transmit to a PC, the optional IRiM (Infrared
Interface Module) is required.
28
All manuals and user guides at all-guides.com
diS recall stored data
Prt printing stored data
setting the date and time
3
user calibration
diS – Recall of stored data
1
n xx (xx: 16...1)
YYYY (e.g. 2011)
mm.dd (monthmonth:dayday)
hh:mm (hourhour:minuteminute)
Method
x,xx
Prt – Transmitting stored data (to Printer or PC)
1
MD200_1 09/2011