Electrolux EC2830AOW2 Notice D'utilisation page 10

10 www.electrolux.com
8.1 What to do if...
Problem
The appliance does not op-
erate.
The appliance is noisy.
Audible or visual alarm is
on.
Power indicator light is
flashing.
The lid doesn't close com-
pletely.
The lid is difficult to open.
The lamp does not work.
All manuals and user guides at all-guides.com
Possible cause
The appliance is switched
off.
The mains plug is not con-
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not sup-
ported properly.
The cushion spacers loca-
ted between the back of the
cabinet and the pipes come
loose.
The cabinet has been re-
cently switched on or the
temperature in the appli-
ance is too high.
An error has occurred in
measuring the temperature.
The appliance is not work-
ing properly.
The lid gaskets are dirty or
sticky.
There is excessive frost.
Food packages are block-
ing the lid.
The lid gaskets are dirty or
sticky.
The valve is blocked.
The lamp is in stand-by.
The lamp is defective.
Solution
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different electri-
cal appliance to the mains
socket. Contact a qualified
electrician.
Check if the appliance
stands stable.
Put them back in place
again.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm" and if the prob-
lem still occurs contact a
qualified electrician or con-
tact the nearest Authorized
Service Centre.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
Clean the lid gaskets.
Eliminate excess frost.
Arrange the packages in the
right way, see the sticker in
the appliance.
Clean the lid gaskets.
Check the valve.
Close and open the door.
Refer to "Replacing the
lamp".