Operation; Saving Energy; Setting The Temperature - Dometic DM20D Instructions De Montage Et De Service

Minibar à tiroir
Masquer les pouces Voir aussi pour DM20D:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DM20
➤ Screw the door handle (4) onto the door.
➤ Push the plugs (3) on the screws of the door handle (4).
➤ Push the drawer into the cabinet.
7

Operation

A
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, a service agent or
similarly qualified person to avoid hazard.
7.1

Saving energy

• Only open the minibar as often and for as long as necessary.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
7.2
Using the minibar
The minibar starts cooling when connected to power. During normal operation the
Status LED is glowing. If an error occurs the Error LED is blinking (see chapter "Trou-
bleshooting" on page 20).
7.3

Setting the temperature

To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the minibar as often
and for as long as necessary. Store the foodstuff in such a way that the air can still
circulate well.
• The minibar is equipped with an automatic temperature regulation function.
Select the average of the possible temperature values.
• Adjust the temperature to the quantity and type of the foodstuff.
The minibar is set by default to a cooling temperature of 7 °C (47 °F) at an ambient
temperature of 25 °C (77 °F).
EN
Operation
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dm20fDesign dm20dDesign dm20f

Table des Matières