Before The First Use; How To Use - Di4 Vapore Stiro Blue 2800 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

or procedures on the device. Only an official technical support service centre may carry out repairs on
this product.
Proceed according to maintenance and cleaning section of this manual for cleaning
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.

BEFORE THE FIRST USE

Before using the steam iron, please ensure you read the user manual and understand all parts and
features of the steam iron. Be sure to remove any packaging material and labels before using for the
first time.
In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on
clothes and there may be traces of dirt on the soleplate

HOW TO USE

Always check whether a label with ironing instructions is attached to an article to be ironed. Follow these
instructions in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing instruc-
tions or in fabric label.
Marking
. (1 dot)
. . (2 dots)
... (3 dots) / MAX
Insert the main plug into the wall socket. The indicator light will turn on. Once the selected tempera-
ture is reached, the light will turn off, indicating you may start ironing.
WATER TANK FILLING
Unplug the iron before filling the water tank.
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix
tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively
(distilled water: tap water). Check with your water supplier to determine the type of water in your
area. Never use 100% distilled or demineralized, rain water, softened water, scented water, water
from other appliances such as refrigerators, air conditioners, dryers or other types of home water
preparation water.
Open the cover for filling.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
The water tank should be emptied after each use.
Material, for example
Acetate, elastane, polyamide, polypropylene
Cupro, polyester, silk, triacetate, viscose, wool
Cotton, linen
17

Publicité

Table des Matières
loading

Table des Matières