Installation; Door Reversibility - ARTHUR MARTIN ARB5000AOW Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10

INSTALLATION

WARNING! Refer to Safety
chapters.
Positioning
This appliance should be installed in a dry,
well ventilated indoor climate where the
ambient temperature corresponds to the
climate class indicated on the rating plate
of the appliance:
Climate class
SN
N
ST
T
Some functional problems might
occur for some types of models
when operating outside of that
range. The correct operation can
only be guaranteed within the
specified temperature range. If you
have any doubts regarding where
to install the appliance, please
turn to the vendor, to our customer
service or to the nearest Service
Centre
Location
It must be possible to disconnect
the appliance from the mains
power supply; the plug must
therefore be easily accessible
after installation.
The appliance should be installed well
away from sources of heat such as
radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around
the back of the cabinet. To ensure best
performance, if the appliance is positioned
below an overhanging wall unit, the
minimum distance between the top of
the cabinet and the wall unit must be
at least 100 mm. Ideally, however, the
appliance should not be positioned below
overhanging wall units. Accurate levelling
is ensured by one or more adjustable feet
at the base of the cabinet.
Ambient temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
It is advisable for there to be 75mm
separating the back of the fridge to the
wall, at least 100mm of space at its two
sides, height of over 100mm from its top
and a clear space upfront to allow the
doors to open 160°

Door reversibility

WARNING! Before carrying out
any operations, remove the plug
from the power socket.
CAUTION! To carry out the
following operations, we suggest
that this be made with another
person that will keep a firm hold on
the doors of the appliance during
the operations.
1. Remove the top hinge cover.
2. Unscrew the 2 retaining screws, and
remove the hinge from the appliance.
4
1
3
2
1

Publicité

Table des Matières
loading

Table des Matières