Editing The Scheduled List - Samsung DVD-HR770 Mode D'emploi

recording
- Set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer recording
will not operate.
- Do not select PDC or VPS unless you are sure the programme you wish to record is broadcast with
PDC or VPS.
•
TITLE : To label the title name, press the RED(A) button.
Title renaming screen appears.
Follow steps 4 and 5 of "Renaming (Labelling) a Title" on pages 73~74.
5. After selecting the set up value for each mode, press the OK button to select Save.
•
will appear on the front panel. It means that a timer recording is registered.
If the timer settings overlap;
The programmes are recorded in order of priority. After recording of the fi rst programme is complete, the
second programme starts being recorded.
To exit without saving the current setting
Press the EXIT (
To return to the previous menu
Press the RETURN button if you don't want to set a timer recording.
6. Turn the power off to fi nish the Timer Recording setting.
Timer Recording will not work when the power is on.
M

The timer recording time may differ from the set time depending on disc status and overall timer recording status
(for example, recording times overlapping, or when the previous recording ends within 2 minutes before the start
time of the next recording.)

You can make up to 12 Timer Recordings.

If HDD disk has no available recording space,

If you have set the Timer Recording using VPS/PDC, the fan can still operate and make a noise when the power is
off.

Editing the Scheduled List

Follow these directions to edit the Scheduled List.
To setup, follow steps 1 to 2 in "Making a Timer Recording" on page 67.
3. Press the ▲▼ buttons to select the number of the Scheduled List
you want to edit, then press the OK button.
•
Edit the items you want to modify. See the "Making a Timer
Recording" section for more information on Timer Recording
Input items. (See pages 67~68)
4. Press the OK button to confi rm the edited setting.
5. Press the EXIT (
Scheduled List screen will disappear.
68_ recording
) button.
) button after fi nishing the operation. The
blinks. It means that HDD disk has no space to record.
>
MOVE
HDD
Current Time 10:54
No. To Source Date Start End Mode VPS/PDC
-- --- ---- -- -- --:-- --:-- --
01 HDD PR 01 JAN 01 17:30 18:30 SP
02 HDD PR 01 JAN 01 21:00 22:00 SP
03 HDD PR 01 JAN 01 23:15 23:45 SP
Recordable Time HDD 108:14 SP
Add Delete Recorded List
s r
SELECT RETURN
Scheduled List
--
On
On
On
e
EXIT