Time Shift Function As A Live Signal - Samsung DVD-HR770 Mode D'emploi

recording

TIME SHIFT FUNCTION AS A LIVE SIGNAL

This function replays recordings as a live signal.
If you are interrupted while watching a TV programme, simply press the TIME
SHIFT button, and the HDD & DVD RECORDER immediately starts recording
the programme.
Using the Time Shift function
1. Press the TIME SHIFT button on the remote control.
The Time Shift menu is displayed.
2. Press the ▲▼ button to select On, then press the OK button.
3. While watching the currently broadcasting programme, press the PAUSE (
The programme on TV is set in pause mode and the Time Shift Bar is displayed.
4. Press the PLAY (
Time Shift Screen Elements
1 2
►
HDD Play
Buttons on the Remote Control used for Time Shift function
1. PLAY ( ) button : Playback.
2. PAUSE ( ) button : Pause live TV.
3. SEARCH (
4. SKIP ( ) button, STOP (
5. SKIP ( ) button : Returns to the point where Time Shift begins.
M

The Time Shift is available only when HDD mode is selected.

You can use this function for up to maximum two hours.

You can only play the contents by using the menu when the Time Shift is set to On.

Press TIME SHIFT button to cancel the Time shift function.
66_ recording
) button to resume watching the programme.
3 4 5 6
13:25:04
14:02:28
7
) buttons : Fast play ( X 2, X 4, X 8, X 16, X 32, X 128)
) button : Switches to live TV.
Time Shift
>
CHANGE
Displays the current media.
Displays the current status.
Watching Point.
Current play time.
5
Live Point.
6
Live Time.
7
Time Shift Time Bar
S
On
s
SELECT
) button.