Protection Against Overheating; Remote Control - Bestron AWH2000 Mode D'emploi

OPERATION - Connect
Model with plug:
Connect the device to the nearest
power outlet. You can also have the
unit connected in a fixed point by an
authorised installer.
Model without plug:
Have the unit connected by (preferably) a
recognised installer in a fixed point.

PROTECTION AGAINST OVERHEATING

This device turns off automatically in the event of overheating. For example, when ventilation is either
partly or completely obstructed. In this case, turn off the device with the Standby switch, remove the object
blocking the vents and wait about 30 minutes for the device to cool. Then switch the device on again with
the Stand-By switch. Please contact customer service if the problem persists.

REMOTE CONTROL

ON/OFF Switches the device on or off
24H Sets the shutdown timer
MODE Switches between Ventilating, Heating and
Rapid heating
LOCK Enables Child Lock mode
AUTO Enables Open-Window Protection
CLOCK Displays the current time
TEMP Sets the temperature weekly timer
TIMER Sets the weekly timer
SET Sets the day and time
POWER-OFF DELAY
When you switch off the device, it will continue to work for a few seconds. This is normal.
OPERATION - Quickstart guide
Standby mode
Before you can operate the device using the remote control, you must put it in standby mode with the
Standby switch.
Ventilation
Switch on the device by pressing the ON/OFF button on the remote control. The appliance will ventilate and
the ventilation light will turn on.
blue (N)
brown (L)
31
P N
EN