Safety Precautions When Handling Batteries - Dometic PJS 1000 Guide Rapide

Safety instructions
Electrocution hazard
• Before starting the device, ensure that the power supply cable and the plug are dry
and the plug is free from rust or dirt.
• If you are working on electrical systems, ensure that there is somebody close at hand
who can help you in emergencies.
• Lay the cables so that they cannot be damaged by sharp edges, doors or the hood.
Do not lay any cable so that it is heavily kinked. Crushed cables can lead to serious
injury.
• Do not disconnect any cables when the device is still in use.
• Never pull the plug out of the socket by the cable.
Fire hazard
• Do not drop, hit or apply excessive force to the device to avoid damage to external
and internal parts.
• Do not place the jump starter near flammable materials.
Risk of injury
• When positioning the device, ensure that all cables are suitably secured to avoid any
form of trip hazard.
A
NOTICE! Damage hazard
• Ensure that the air inlets and outlets of the device are not covered.
• Ensure a good ventilation.
• Set up the device in a dry location where it is protected against splashing water.
• Loop the cable loosely when storing, tight wrapping may damage the cable and
internal parts.

1.3 Safety precautions when handling batteries

!
WARNING! Failure to obey these warnings could result in death or serious
injury.
Risk of injury
• Batteries contain aggressive and caustic acids. Avoid battery fluid coming into con-
tact with your body. If your skin does come into contact with battery fluid, wash that
part of your body thoroughly with water.
If you sustain any injuries from acids, contact a doctor immediately.
!
CAUTION! Failure to obey these cautions could result in minor or moderate
injury.
Risk of injury
• When working on batteries, do not wear any metal objects such as watches or rings.
Lead acid batteries can cause short circuits which can cause serious injuries.
• Wear goggles and protective clothing when you work on batteries. Do not touch
your eyes when you are working on batteries.
12
PJS1000
EN