AeraMax Professional AM3 PC Mode D'emploi page 4

ODOR/VOC
This measures the level of VOC's (volatile organic compounds) and odors coming into the unit from the ambient air. This has
not been directly filtered yet. The machine adjusts its performance based on VOC's detected.
Blue - low level of VOC's detected
Yellow - medium level of VOC's detected
Red - high level of VOC's detected
CARBON ONLY FILTERS
It is NOT recommended to use carbon only filters with the AM3 PC, AM3S PC, AM4 PC, or AM4S PC units. Carbon filters do not
capture particle sizes that can be detected by our sensors. In the case that a carbon only filter is used, the display changes
to display VOC / ODOR LEVEL only. This will show the status similar to the VOC / ODOR bar with LOW / BLUE, MEDIUM /
YELLOW, HIGH / RED. This screen automatically displays when the unit detects a carbon only filter, and cannot be selected.
FILTER INFORMATION
This screen contains the information needed to manage and reorder filters. The image(s) shown is the current filter inside the
unit. AM3 will show 1 filter configuration while AM4 will show 2 filter configurations.
Life Remaining measures the estimated amount of life remaining in the HEPA and/or Carbon filter(s). AM3 will have 1
countdown while AM4 will have one for the left and right filters. To keep machine performing optimally, replace the filters
once this percentage reaches 10% - 0% and the front screen flashes a "reorder filter" or "replace filter" alert.
See the Machine Manual to reset filters on the machine's user interface.
These alerts will automatically turn off once the filter is replaced/reset or you can turn this alert off at any time by pressing
the MODE button to change FRONT PAGE NOTIFICATION to off. Once the new filters are replaced/reset, the life countdown
will restart automatically.
4