Safety Information; Installation And Electric Connections - MACAP M7 Serie Instructions Originales

Flat grinding blades
Conical grinding blades
power
Motor
Dosing counter
Dimensions (mm)
Net weight
Operating cycle (230 V - 50 Hz)
Flat grinding blades
power
Motor
Dosing counter
Dimensions (mm)
Net weight
Operating cycle (230 V - 50 Hz)
4

SAfETY INfORMATION

This appliance has been designed exclusively for grinding coffee beans, consequently the manufacturer will not be held liable
for any damage or incidents that are caused if it is used for any other purpose.
The warranty will be automatically invalidated in the event the appliance is used improperly.
Only qualified operators must install the appliance or carry out any technical maintenance work.
The appliance is not waterproof and must be kept well clear of any potential water sprays or very damp areas.
The appliance has been designed for professional and not home use, and therefore must only be used by trained personnel.
The appliance must not be used by children, or by adults with reduced physical, mental or motor capacities, nor by anyone
without sufficient experience or knowledge, unless they receive specific training or use the appliance under the supervision
of a trained person.
keep the appliance out of the reach of children. Children being supervised not to play with the appliance.
The appliance has a thermal circuit breaker for the motor, when it triggers and stops the grinder, unplug the appliance at the
mains and wait at least one hour before turning it back on again.
If the power cable is damaged it must be replaced by the manufacturer or by the technical assistance service, or at any rate
by a person with similar qualifications, so as to prevent all risks.
UNPLUG THE APPLIANCE AT THE MAINS BEFORE CARRYING OUT ANY MAINTENANCE OR CLEANING WORk.
5 INSTALLATION AND ELECTRICAL CONNECTIONS
Installation must be carried out by trained technical personnel.
Installation must be carried out in strict compliance with the safety provisions currently in force in the country of use, with
particular reference to the accident and fire prevention regulations and electricity authority regulations.
Place the appliance on a flat surface to ensure it is perfectly stable. Before connecting the appliance to the mains:
MX 900 M7 900
Ø 65 mm Ø 75 mm
-
300 W 600 W
900 rpm 900 rpm
P P
220 x 370 x h 600 250 x 360 x h 635
13 Kg 15,5 Kg
40 s ON / 150 s OFF 25 s ON / 60 s OFF
MC4 / MC5 / MC5 plus
Ø 58 mm
250 W
1400 rpm

190 x 210 x h 430 / h 470 / h 505 220 x 370 x h 600
8,5 Kg
40 s ON / 120 s OFF
60 s ON / 180 s OFF
MXK
-
- Ø 63 mm
350 W
350 rpm
P
220 x 370 x h 600
15 Kg
40 s ON / 160 s OFF
MC6 MC7
Ø 65 mm Ø 75 mm
340 W 800 W
1400 rpm 1400 rpm
 
250 x 360 x h 635
12,5 Kg 15 Kg
25 s ON / 90 s OFF
ENGLISH
M7K
-
Ø 68 mm
520 W
350 rpm
P
250 x 360 x h 635
16 Kg
25 s ON / 90 s OFF
A3
-
-
-
P
220 x 210 x h 345
8 Kg
-
9