CANARMNA IOL403BK Mode D'emploi

INSTALLATION INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
!
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
Step 1
Top Cap
Cap Nut
Step 3
Nut
Clip
Position the clip over the stud on the fixture and
secure it with the nut.
Repeat steps for other glasses.
EASY CONNECT®
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
Unscrew the cap nuts to
remove the fixture body from
the top cap.
Fixture Body
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Blade
Screwdriver
Step 2
a. Position the fixture as shown for easy installation.
b. Unscrew the nut to reomove the clip onto
the stud.
c. Insert glass as shown.
d. Position glass behind 2 clips.
Nut
Clip
Glass
1
IOL402
IOL403
10/18
Wrench
Glass
Clip