CANARMNA EASY CONNECT IOL401 Mode D'installation

INSTALLATION INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
!
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
Step 1
Nut
Clip
Step 2
Clip
EASY CONNECT®
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
Glass
Nut
TOOLS AND MATERIALS REQUIRED:
a. Position the fixture as shown for easy
installation.
b. Unscrew the nut to reomove the clip onto
the stud.
Glass
c. Insert glass as shown.
d. Position glass behind 2 clips.
Position the clip over the stud on the fixture and
secure it with the nut.
Repeat steps for other glasses.
1
Wrench
Phillips
Screwdriver
Blade
Screwdriver
Clip
IOL401
10/18