Setting The Sensitivity - Ezviz T1 Mode D'emploi

Setting the Sensitivity

Adjust the terminals 1 and 2 of SW2 on the board to adjust the sensitivity:
Sensitivity
High
Medium
(Recommended)
Low
Lower
Turning on/off the LED Indicator
Adjust the terminal 4 of SW2 on the board to turn on/off the LED indicator:
Turn on terminal 4 and the LED indicator blinks when alarm occurs;
Turn off terminal 4 and the LED indicator remains unlit when alarm occurs.
Terminal 1
OFF
ON
OFF
ON
74
Terminal 2
OFF
OFF
ON
ON