Télécharger Imprimer la page

Changing Battery - Ezviz T1 Mode D'emploi

Masquer les pouces Voir aussi pour T1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
Maintenance

Changing Battery

When the detector's battery is low, the detector will send a low battery
warning to the EZVIZ app to remind you to change the battery.
- Take the detector off from the base.
- Open the detector's battery cover and then change the battery.
- Install the detector back to the base.
Debugging
Do not disassemble the device or adjust the settings without authorization.
Disassembling the Detector
- Open the detector's battery cover and loosen the screws on the two
sides of the battery slot, as shown in the following figure.
- Separate the front cover and the rear cover, you can see the DIP switch
on the main board.
Screws
73

Publicité

loading