Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TOOLS REQUIRED:
8 mm L-Wrench
13/15 mm Flat Wrench
5 mm L-Wrench/Screwdriver
Screwdriver (not included)
PARTS INCLUDED:
1 Main Frame
1 Stabilizer Tube
1 Guide Rail Set
1 Manual Incline Lever
1 Console Mast
2 Pedal Arms
2 Lower Handlebars
2 Upper Handlebars
2 Handlebar Caps
2 Lower Link Arms With Footpads
1 Front Top Cap Piece
1 Rear Top Cap Piece
1 Console Mast Boot
1 Console
1 Rear Cover
1 Audio Adapter Cable
1 Power Cord
1 Hardware Kit
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level
flat surface. It is recommended that you place a protective covering on your floor.
Never open box when it is on its side.
NOTE: It is recommended that two people work together for ease and efficiency
while assembling an elliptical.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded. It is recommended you complete the full assembly of your
unit before completely tightening any ONE bolt. Several parts have been pre-
lubricated to aid in assembly and usage. Please do not wipe this off. If you
have difficulty, a light application of lithium bike grease is recommended.
NEED HELP?
If you have questions or if there are any missing parts, contact Customer Tech
Support. Contact information is located on the back panel of this manual.
9
Publicité
Table des Matières
