Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY STEP 9
19
5
18
18
21
22
6
12
NOTE: All hardware for this step is pre-installed.
A Remove 4 PRE-INSTALLED BOLTS (18) from the
CONSOLE (19).
B Attach the CONSOLE CABLES (5) to the
CONSOLE (19).
C Carefully tuck the CONSOLE CABLES (5) into the
CONSOLE MAST (6) before attaching the CONSOLE.
Attach CONSOLE (19) to CONSOLE MAST (6) using
4 PRE-INSTALLED BOLTS (18).
NOTE: Do not to pinch any wires while attaching the console.
D Slide the UPPER HANDLEBAR (21) onto the LOWER
HANDLEBAR (12) making sure handlebars are joined
together completely. Secure the UPPER HANDLEBAR
(21) to the LOWER HANDLEBAR (12) using PRE-
ATTACHED SET SCREWS (22).
NOTE: Make sure upper handlebars are as far down as
possible. Handlebars can be damaged If not secured correctly.
E Repeat STEP D on other side.
ASSEMBLY COMPLETE!
Publicité
Table des Matières
