Johnson LiveStrong LS8.0E Manuel Du Propriétaire page 13

ASSEMBLY STEP 4
5
7
NOTE: Be
careful not
2
to pinch any
wires while
attaching the
console mast.
6
8
J
B
K L
9
HARDWARE FOR STEP 4
PART TYPE
J WAVY WASHER
K FLAT WASHER
B SPRING WASHER
L BUTTON HEAD BOLT
Open HARDWARE FOR STEP 4.
A
Carefully pull the CONSOLE CABLE (5)
B
through the CONSOLE MAST (6) using
the twist tie located inside the CONSOLE
MAST (6).
Attach CONSOLE MAST (6) to MAIN
C
FRAME (2) using PRE-INSTALLED
BOLTS AND WASHERS (7).
Slide WAVY WASHER (J) over CRANK
D
(8) followed by PEDAL ARM (9) as shown.
Rest pedal arm wheel on guide rail.
Attach the PEDAL ARM (9) to the CRANK
E
(8) using 1 FLAT WASHER (K), 1 SPRING
WASHER (B) and 1 BOLT (L).
Repeat steps D–E on the opposite side of
F
the elliptical.
DESCRIPTION QTY
17.2X22.5X0.5T 2
8.2X20.0X1.5T 2
8.2X15.4X2.0T 2
M8X1.25PX20L 2
13