hager HIC4 Serie Notice D'utilisation page 61

Operation
Control 1, 0, 2 (Accessible in aut mode)
It can be activated from:
• operation mode. It is possible to select the position of the changeover switch (1, O, 2) from keypad,
• dry contacts. It is the possible to select the position of the changeover switch (1, O, 2) from specific in puts (terminals
313 to 317),
• remote interface
Description
Electrical operation of the changeover switch to reach position: PS1, PSO, PS2 (1, O ou 2) according to switches
configuration (source 1 connected to switch I or II).
q
The remote control has priority in automatic mode. The product keeps in control mode after transfer sequence.
Remote activation
• This mode is activated closing terminals 313 and 317. Changeover switch position depends on orders present between
terminal 317 and terminals 314-315-316.
Keypad activation
Select required position PS1, PSO or PS2:
• Press "mode" push button
Yes is displayed on the screen for active position
Select a new position (from 1 to 0):
59
All manuals and user guides at all-guides.com